Prefilled,Single use, Auto dispose low cost, blow fill seal Self service vaccine applicato that also protects caregiver from needle prick.
blow fill seal container examples
explanatory video of blow fill seal process
Describe what you intend to do and how you'll do it in one sentence (required 250 Characters)
Worxwell Innovation aims to develop Ek-ject to empower caregivers to administer vaccines by themselves and reduce dependence on immunisation camps in developing countries. This will increase acceptance and increase demand of vaccines.
Explain the idea (less than 2,000 characters)
1) By developing a better self service vaccine applicator, we aim to empower caregivers and reduce the load on immunisation camps. By making the process of immunisation less time consuming and more accessible, we aim to increase acceptance of vaccines among caregivers and assure them with a safe and hygienic vaccine delivery system.
2) In most developing countries, caregivers lead busy lifestyles and might not be able to take their kids to immunisation camps. they also have concerns regarding hygiene and disposal of needles. It would also be less intimidating for kids if a know person(caregiver) administers the vaccine.
3) Ek-ject is made using "blow-fill-seal" technique that packs the vaccine in a sterile environment. The device does not need secondary packaging. The needle cover can be simply twisted to remove and open. When the bulb on the dose chamber is pressed to inject, it collapses inward to evacuate all the liquid in it. It can not be brought back out and reused. This also makes sure that the entire dose is fulfilled. After use, the top cap is locked into place using a folding hinge mechanism built into the device to cover the needle.this prevents needle pricks while disposing. Since some parts of the package like needle cover and dose chamber are broken/change shape after use, so the same package can never be repacked or reused.
holding Ekject while injecting
How to use
Ekject while injecting
Which part(s) of the world does this idea target?
Geographic Focus (less than 250 Characters)
The idea caters to most developing and developed countries where caregivers lead busy lives and are conscious about hygiene and needle reuse.
Who are your end users and how well do you know them? (750 characters)
The end users of the product are caregivers themselves. Caregivers are the people who take care of the kids and bring them for immunisation. In most developed and developing countries the caregivers lead busy lives and are conscious about hygiene and safe disposal. They can learn use the simple applicator by following basic intuitive steps . Since the device is sterile and prefilled, they just have to insert it at a right angle on one of the muscle groups and press the dose chamber. After use they can cover the needle with the top cap and safely dispose the applicator.Kids will also be less intimidated as they know the caregiver and the form factor of the device is smaller and different than an injection.
How is the idea unique? (750 Characters)
This idea is different from many other innovations in their field as it uses a very low cost technique of manufacturing i.e. Blow fill seal technique. This also ensures safety and sterility till it reaches the end user even with out the need for secondary packaging. While innovations in this space address needle reuse issue by cutting the needle, Ek-ject avoids reuse as the needle is moulded in the applicator. Tampering is easily detected. The needle is covered by a cap after use for safe disposal. The collapsing dose chamber ensures fixed amount of drug delivery with just a simple pressing of the bulb. The device make the process simple and easy enough for caregiver to use themselves without assistance or instructions.
Idea Proposal Stage (Select 1)
Blueprint: We are exploring the idea and gathering the inspiration and information we need to test it with real users.
How many months are required for the project idea? (140 characters)
It will take us about 18 to 20 months to develop and test the design among users and refine it into a market ready product.
Organization Name (less than 140 characters)
Type of Submitter
We are a Private Sector Corporation
Product Design Consultancy
Organization Location (less than 140 Characters)
Ahmedabad, Gujarat, India
What is the current scale of your organization’s work?
National (expansive reach within one country)
Tell us more about your organization/company (1-2 sentences)
We are a product design consultancy(operational since 2012) that supports innovation from idea stage to market ready products after testing and tooling development. We have strategic partnerships with vendors who are are experts in different manufacturing processes that enables us to deliver commercially viable and innovative design solutions. We have worked with clients in diverse fields like machinery, appliances, medical devices, electronics and packaging design.
Who will work alongside your organization in the project idea? (750 characters)
We will involve NGOs active in West India like ShantiLife and Anandi to reach out to immunisation programs in rural sectors. We are also associated with a qualitative research agency called Observatory (www.observatory.co.in)
How many people are on your team?
Tell us more about you and your team
Vivec Rehman : Founder, Worxwell Innovation. Qualified Product designer. 7 years of experience.
Harshada Patil : Qualified Researcher, Also founder of Observatory. 5 years of experience
Tanveer Khorajiya : Mechanical Engineer, 4 years of experience in prototyping and 3d printing
Vivec has successfully designed over 50 products and is well connected with the manufacturing industry, especially plastics. He is experienced in the design of blow moulded containers and tooling development.
Harshada is well connected with NGOs due to the her nature of work at Observatory. She is also very experienced at collecting and analysing qualitative data extracted from the field. She will be an asset to the project during field trials.
Tanveer is an expert at prototyping and 3d printing. He will be of great help in developing the design of device and evaluating its mechanical properties.